Al Furat MECHANICAL
AQUILA 100 rear-fork wrecker with orange bodywork and a red rear Z-arm and fork extended, three-quarter rear view.
Al Furat Group · Aquila 100 · Rear-Fork Wrecker

Recover vehicles faster. Without leaving the cab.

A fast, versatile rear-fork wrecker engineered for 3,500 kg GVW cabs and demanding vehicle-removal operations.

Configure AQUILA 100 & Get a Quote → See It in Operation ↓

Tell us your chassis, operating market and requirements — our team will recommend the right configuration.

3,500 kg
Cab GVW
Hand control
Operation
Fork + Z-arm
Rear lifting
THE RANGE

Three platforms.
One standard.

01 / 03
4008001200
Aquila-400 light duty platform
LIGHTS

Sleek, low profile design. IP68 sealed against moisture and corrosion.

DECK

Full steel construction. 12,000 lb structural capacity.

WINCH

Up to 12,000 lb winches for maximum pulling power.

TOOLBOX

Moulded polypropylene — resists flame, water and dust.

CONTROLS

Centralised, dual lighted side control panel.

400
LIGHT DUTY

AQUILA-400

Our top-selling carrier, with the lowest load angle in its class — clearance over the lowest profile vehicles.

12,000 lb
STRUCTURAL DECK
12,000 lb
WINCH CAPACITY
Aquila-800 medium duty car carrier
LIGHTS

Sleek, low profile design. IP68 sealed against moisture and corrosion.

DECK

Full steel construction. 17,000 lb structural capacity.

WINCH

Up to 12,000 lb winches for maximum pulling power.

TOOLBOX

Moulded polypropylene — resists flame, water and dust.

WHEEL LIFT

Low profile and versatile. 3,500 lb or 5,000 lb lift.

800
MEDIUM DUTY

AQUILA-800

A multipurpose workhorse — steel or aluminium deck, multiple length and width configurations.

17,000 lb
STRUCTURAL DECK
5,000 lb
WHEEL LIFT, MAX
Aquila-1200 heavy duty car carrier
LIGHTS

Aerodynamic, IP68 sealed against moisture, vibration and corrosion.

DECK

Full steel construction. 30,000 lb structural capacity.

WHEEL LIFT

Low profile and versatile. 5,000 lb or 7,500 lb lift.

WINCH

20,000 lb worm gear winch for precision control.

TOOLBOX

Moulded polypropylene — resists flame, water and dust.

1200
HEAVY DUTY

AQUILA-1200

Built for reliability, durability and superior performance — steel deck, multiple deck configurations.

30,000 lb
STRUCTURAL DECK
20,000 lb
WORM GEAR WINCH
The machine

Built for fast, controlled vehicle removal

The AQUILA 100 combines a rear fork, versatile Z-arm and winch-assisted recovery system in a compact platform designed for everyday vehicle-removal work.

AQUILA 100 with its rear fork extended and lowered to the ground, ready to approach a parked vehicle.
  1. 1Rear forkRemoves a parked vehicle by positioning itself perpendicular to the vehicle being removed.
  2. 2Z-armVersatile rear arm for operating in difficult or restricted situations.
  3. 3Fixed boomCarries the winch and the pulley guide at its end.
  4. 4Winch pulley guideRedirects the winch rope to assist approach and alignment.
  5. 5Hand-control systemEvery manoeuvre is performed from the hand control.
See it in operation

Four steps from approach to removal

A rear-fork recovery sequence built for speed and control.

01AQUILA 100 positioned for a recovery with the rear fork lowered.

Approach

Position the wrecker for the recovery situation.

02AQUILA 100 rear fork spread horizontally, aligned to the vehicle being removed.

Align

Use the rear Z-arm and fork to align with the vehicle.

03AQUILA 100 fork cradling the vehicle's wheels during a lift.

Lift & secure

Control the manoeuvre through the hand control.

04AQUILA 100 Z-arm with a wheel-retaining strap securing the load for removal.

Remove

Move the parked or disabled vehicle efficiently.

Configure AQUILA 100 & Get a Quote →
Capabilities

Rear fork, Z-arm and hand control

Designed for recovery from the start — not adapted for it.

Direct rear view of the AQUILA 100 showing the fork device spread perpendicular to the vehicle being removed.
Rear fork

Designed for difficult removal angles

The rear-fork device can position itself perpendicular to the vehicle being removed, helping operators work in constrained or challenging environments.

Close-up of the AQUILA 100 rear Z-arm with a wheel-retaining strap positioned for alignment.
Z-arm

Versatility where access is limited

The rear Z-arm gives operators the flexibility to work around difficult vehicle positions and restricted spaces.

  • Positions the fork for awkward approaches.
  • Works around obstacles in tight environments.
  • Retaining strap secures the load during the lift.
AQUILA 100 hand-control lever bank used to perform every recovery manoeuvre.
Hand control

Control every manoeuvre from the hand control

The operating system is designed to make recovery movements direct, controlled and easy to manage.

  • All manoeuvres are performed from the hand control.
  • The rear fork can remove a parked vehicle without the operator leaving the cab.
AQUILA 100 fixed-boom pulley guide with the winch rope, Al Furat branding on the checker-plate body.
Winch & pulley guide

Winch guidance when alignment matters

The pulley guide at the end of the fixed boom redirects the winch rope to assist the approach and positioning of the vehicle being recovered.

Specifications

AQUILA technical panel

Verified specifications are shown below. Figures still being confirmed by Al Furat are marked “Available on request”.

Verified specifications

Equipment typeRear-fork wreckerVerified
Recommended cab GVW3,500 kgVerified
OperationHand controlVerified
Rear lifting systemFork with versatile Z-armVerified
Removal methodFork positions perpendicular to the vehicleVerified
Recovery assistanceFixed-boom pulley guide and winchVerified

Pending confirmation

Fork-device capacityAvailable on requestOn request
Compatible chassisAvailable on requestOn request
Overall dimensionsAvailable on requestOn request
Equipment weightAvailable on requestOn request
Winch ratingAvailable on requestOn request
Hydraulic specificationsAvailable on requestOn request
Available optionsAvailable on requestOn request
WarrantyAvailable on requestOn request
Delivery lead timeAvailable on requestOn request
Download Aquila Catalogue ↓ Configure AQUILA 100 & Get a Quote →
Configuration

Configured around your chassis and operation

Every recovery operation is different. Al Furat can configure the AQUILA 100 around the selected chassis, operating market and practical requirements of your fleet.

01

Chassis integration

Configured around your selected 3,500 kg GVW cab.

02

Equipment layout

Body and recovery system arranged for your workflow.

03

Storage & toolboxes

Lockable compartments for straps, chains and tools.

04

Lighting

Work and warning lighting for your operating market.

05

Controls

Hand-control placement to suit the operator.

06

Finishes & branding

Colour and livery for your fleet identity.

07

Market requirements

Built to the requirements of your destination market.

Start My Configuration →
Buying process

From enquiry to delivery

1

Tell us your operation

Share your market, use case and volumes.

2

Confirm chassis & configuration

We recommend the right build for your cab.

3

Engineering & production

Your AQUILA 100 is built and integrated.

4

Delivery & support

Handover and ongoing recovery-equipment support.

AQUILA 100 rear-fork wrecker, full side profile.
Request a quote

Configure your AQUILA

Share the essentials and an Al Furat recovery-equipment specialist will help confirm the right configuration for your operation.

  • Rear-fork wrecker for 3,500 kg GVW cabs.
  • Configured around your chassis, market and requirements.
  • Designed and manufactured in the UAE.